机器翻译
简体中文

IP 地理位置由 DB-IP 提供 (CC BY 4.0)

← 全部工具

Mallard

高阶非结构有限体积 CFD 求解器,用于可压缩 Euler、Navier-Stokes 和反应流。可通过 Kokkos 在 CPU 以及 NVIDIA 与 AMD GPU 上运行。

10 条历程 · 0 个主版本/里程碑 · 1 年 · https://matthewbonanni.github.io/mallard/ · GitHub 仓库 · RSS

发布历程 (按时间倒序,按年份与版本分组)

2026 10 条

0.x

  1. Mallard 0.10.0 v0.10.0 release

    Device-side step scheduling and CUDA graphs for every kind of run, including reacting flow and large-eddy simulation. Each run writes a self-contained report.html, and new post, info, diff and pack commands plus a Python package work on saved output.

  2. Mallard 0.9.1 v0.9.1 release

    Mallard 0.9.1 fixes two problems in 0.9.0. Viscous [[forces]] were slightly wrong on several ranks, and the release published no container images. Inputs and results are otherwise unchanged from 0.9.0. Fixed - [[forces]] on several ranks exchanges the halo before computing the wa

  3. Mallard 0.9.0 v0.9.0 release

    Mallard 0.9.0 makes regions a single concept used everywhere. Points, curves, surfaces and volumes, defined once and named, drive sources, sponges, initial states, probes, snapshots and curved boundaries. It adds probes of every dimension with exact fluxes, explicit boundary-cond

  4. Mallard 0.8.0 v0.8.0 release

    Mallard 0.8.0 adds curved high-order boundaries, which bring TENO-E orders 3–6 to their design accuracy at curved walls, where straight-sided faces did not converge. It sets up 3D TENO 6–9.5× faster on the GPU and fits about 15% more cells on one (twice as many with opt-in single

  5. Mallard 0.7.0 v0.7.0 release

    Mallard 0.7.0 adds large-eddy simulation with explicit subgrid-scale and combustion models and a kinetic-energy-preserving hybrid flux, which also brings the Re_τ = 180 channel DNS within 2% of Moser, Kim & Mansour. It adds synthetic turbulent inflow, makes 3D TENO 2.2× faster an

  6. Mallard 0.6.0 v0.6.0 release

    Mallard 0.6.0 adds axisymmetric flows, non-reflecting boundaries, in-situ statistics, parallel HDF5 output and AMD GPUs, and switches cfl to the conventional unstructured normalization. Changes that affect results - Conventional CFL normalization ([#175](https://github.com/Matthe

  7. Mallard 0.3.0 v0.3.0 release

    Mallard 0.3.0 adds three-dimensional simulation, periodic boundaries and a distributed-memory (MPI) solver that scales across GPU nodes. 3D - -DMallard_DIM=3 builds a 3D solver for tetrahedra, hexahedra, prisms and pyramids in any mix ([#35](https://github.com/MatthewBonanni/mall

  8. Mallard 0.4.0 v0.4.0 release

    Mallard 0.4.0 completes the distributed-memory solver and adds finite-rate chemistry: reacting Euler and Navier–Stokes flows with arbitrary Cantera mechanisms. Finite-rate chemistry Following the design in docs/design/chemistry.md ([#52](https://github.com/MatthewBonanni/mallard/

  9. Mallard 0.5.0 v0.5.0 release

    Mallard 0.5.0 makes finite-rate chemistry fast on GPUs and makes TENO-E robust on stretched cells. Chemistry on GPUs - Team-per-cell kernels ([#119](https://github.com/MatthewBonanni/mallard/pull/119)): from 16 species, each cell is integrated by a warp, with a sparse LU from 30

  10. Mallard 0.2.0 v0.2.0 release

    Mallard 0.2.0 is the first release built with agentic development. It turns the 0.1 prototype into a validated, high-order 2D solver that runs on CPUs and NVIDIA GPUs. Documentation and gallery: [https://matthewbonanni.github.io/mallard/](https://matthewbonanni.github.io/mallard/