机器翻译
简体中文

IP 地理位置由 DB-IP 提供 (CC BY 4.0)

← 全部工具

HELIX Aero-GCP

HELIX AERO 开发的 Metashape 插件,可识别地面控制点标靶并给出标记建议,也可在用户自有数据上再训练。以 PolyForm Noncommercial 1.0.0 许可发布;商业使用需另行许可。

8 条历程 · 0 个主版本/里程碑 · 1 年 · https://github.com/helix-aero/AeroTools · GitHub 仓库 · RSS

发布历程 (按时间倒序,按年份与版本分组)

2026 8 条

0.x

  1. v0.6.0-dev release

    Dev version, same tools as the stable v0.6.0 (Aero-GCP, Aero-Space, Aero-Exports, Aero-L3). Download the zip of the dev branch, or use Aero > Check for updates.... Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact [info@helix.corsica](mailto:

  2. v0.6.0 release

    New: Aero-L3 joins the stable version, next to Aero-GCP, Aero-Space and Aero-Exports. Aero-L3 prepares the photos of a DJI Zenmuse L3 for Metashape, without DJI Terra. Point it at the mission folder: it reads every flight, checks the photos, then creates a chunk ready to align. -

  3. v0.4.0-dev release

    Dev version, same tools as the stable v0.4.0 (Aero-GCP, Aero-Space, Aero-Exports). Download the zip of the dev branch, or use Aero > Check for updates.... Free for non-commercial use (PolyForm Noncommercial 1.0.0). For commercial use, contact [info@helix.corsica](mailto:info@heli

  4. v0.4.0 release

    New: Aero-Space and Aero-Exports join the stable version, next to Aero-GCP. - Aero-Space finds the old Metashape projects that fill your disk, then lightens or deletes them (with a safety copy). - Aero-Exports writes the orthomosaic and the DEM with short names, in several format

  5. AeroTools 0.3.0 (dev) v0.3.0-dev release

    The dev branch: stable plus the tools that are still being tested. - Aero-GCP: AI marking of ground control points. - Aero-Space: finds the heavy Metashape projects on a drive and lightens them, with a safety copy. - Aero-Exports: orthomosaic and DEM export (GeoTIFF, JPEG, JPEG 2

  6. AeroTools 0.3.0 v0.3.0 release

    First release of AeroTools, the Metashape plugins by HELIX AERO. Aero-GCP finds the ground control points in your photos with AI and helps you mark them fast: review, adjust, residual check and a client PDF report. Install: download the zip of the main branch, unzip it, double-cl

  7. AeroTools 0.3.1 (dev) v0.3.1-dev release

    Same fix as the stable version: the Aero-GCP panel opens only once, and a cross at its top right closes it. The dev branch still carries Aero-Space and Aero-Exports. Update: Aero > Check for updates..., or download the zip of the dev branch again. Free for non-commercial use (Pol

  8. AeroTools 0.3.1 v0.3.1 release

    Fix: the Aero-GCP panel opens only once. Clicking Aero > Aero-GCP again brings the open panel to the front instead of opening another one. New: a cross at the top right of the panel closes Aero-GCP, and the banner line is centred. Update: Aero > Check for updates..., or download